Table of Contents
Advertisement
31
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1
Remove any installed card or blank from the Media-Card Reader.
2
Remove the battery pack. See "Removing the Battery Pack" on page 12.
3
Remove the base cover. See "Removing the Base Cover" on page 14.
4
Remove the center control cover. See "Removing the Center Control Cover" on
page 26.
5
Remove the keyboard. See "Removing the Keyboard" on page 32.
6
Remove the macro keyboard. See "Removing the Macro Keyboard" on page 36.
7
Remove the display assembly. See "Removing the Display Assembly" on page 43.
8
Follow the instructions from step 1 to step 7 in Removing the Palm Rest.
60
|
Removing the I/O Board
Removing the I/O Board
Before working inside your computer, read the safety
Advertisement
Table of Contents
