Table of Contents
Advertisement
36
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the video-card heat-sink fan(s) with the screw holes on the
computer base.
2
Tighten the captive screws that secure the secondary video-card heat-sink fan to the
computer base.
3
Tighten the captive screws that secure the primary video-card heat-sink fan to the
computer base.
4
Route the primary video-card heat-sink fan cable through the routing guides on the
computer base.
5
Connect the primary video-card heat-sink fan cable to the connector on the system
board.
6
Connect the secondary video-card heat-sink fan cable to the connector on the
system board.
Postrequisites
1
Replace the base cover. See "Replacing the Base Cover" on page 15.
2
Replace the battery pack. See "Replacing the Battery Pack" on page 13.
3
Follow the instructions in "After Working Inside Your Computer" on page 11.
Replacing the Video-Card
Heat-Sink Fan(s)
Before working inside your computer, read the safety
Replacing the Video-Card Heat-Sink Fan(s)
69
|
Advertisement
Table of Contents
