Removing The Processor Heat-Sink Fan; Prerequisites; Procedure - Alienware M18x R2 Owner's Manual

41
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Prerequisites

1 Remove the battery pack. See "Removing the Battery Pack" on page 7.
2 Remove the base cover. See "Removing the Base Cover" on page 7.

Procedure

1 Disconnect the processor heat-sink fan cable from the connector on the system
board.
2 Loosen the captive screws that secure the processor heat-sink fan to the computer
base.
3 Lift the processor heat-sink fan along with the cable away from the computer base.
1
1 processor heat-sink fan cable
connector
3 captive screws (3)
76
|

Removing the Processor Heat-Sink Fan

Removing the Processor
Heat-Sink Fan
Before working inside your computer, read the safety
2 processor heat-sink fan
3
2