Table of Contents
Advertisement
39
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the battery pack. See "Removing the Battery Pack" on page 12.
2
Remove the base cover. See "Removing the Base Cover" on page 14.
3
Remove the center control cover. See "Removing the Center Control Cover" on
page 26.
4
Remove the keyboard. See "Removing the Keyboard" on page 32.
5
Remove the macro keyboard. See "Removing the Macro Keyboard" on page 36.
6
Remove the display assembly. See "Removing the Display Assembly" on page 43.
7
Follow the instructions from step 1 to step 7 in Removing the Palm Rest.
8
Remove the video-card heat-sink(s). See "Removing the Video-Card Heat-Sink(s)" on
page 70.
Procedure
1
Remove the screws that secure the video-card(s) to the system board.
2
Lift and slide the video-card(s) out to disconnect it from the connector on the system
board.
Removing the Video Card(s)
Before working inside your computer, read the safety
Removing the Video Card(s)
73
|
Advertisement
Table of Contents
