Battery Removal - Polaris 2000 Universal Snow Owner's Safety And Maintenance Manual

BATTERY

Battery Removal

CAUTION:
Whenever removing or reinstalling the battery, disconnect the negative (black)
cable first and reinstall the negative cable last to avoid the possibility of explosion.
1. Disconnect hold down straps holding battery in position.
2. Remove battery vent tube from battery.
3. Disconnect black (negative) battery cable first.
4. Disconnect red (positive) battery cable second.
5. Lift the battery out of the snowmobile, being careful not to tip it sideways or spill
electrolyte.
CAUTION:
If electrolyte spills, immediately wash it off with a solution of 1 tablespoon baking
soda and one cup water to prevent damage to the snowmobile.
When your snowmobile is placed in storage for one month or more:
D Remove the battery.
D Charge it to the proper level.
D Store it in a cool dry place.
It is possible for batteries to freeze at the following charge conditions, resulting in
cell damage.
D 100% Charged -75° F
D 75% Charged -24° F
D 50% Charged 0° F
D 25% Charged +13° F
0% Charged +18° F
D
Before using the battery, take it to your dealer for testing and recharging.
46
(--59° C)
(--31° C)
(--18° C)
(-11° C)
(--8° C)