Battery Removal; Battery Installation - Polaris RZR PRO R Service Manual

ELECTRICAL

BATTERY REMOVAL

1. Remove the driver's seat to access the battery
2. Disconnect the black (negative) battery cable(s).
3. Disconnect the red (positive) battery cable(s).
To reduce the chance of sparks: Whenever removing
the battery, disconnect the black (negative) cable first.
When reinstalling the battery, install the black (negative)
cable last.
4. Remove the battery hold-down bracket fasteners
and remove the bracket.
5. Lift the battery out of the vehicle.
12.24
CAUTION

BATTERY INSTALLATION

q
.
Using a new battery that has not been fully charged can
damage the battery, result in a shorter life and hinder
1. Ensure the battery is fully charged.
2. Place the battery in the battery holder and secure
with hold-down strap. Torque fasteners to
specification.
Battery Mount Bracket Fasteners:
3. Coat the terminals with dielectric grease or petroleum
jelly.
4. Connect and tighten the red (positive)
first.
5. Connect and tighten the black (negative)
last. Torque terminal fasteners to specification.
w
,
6. Verify that cables are properly routed and reinstall the
driver's seat.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
CAUTION
vehicle performance.
TORQUE
53 in-lbs (6 Nm)
TORQUE
Battery Terminal Fasteners:
60 in-lbs (7 Nm)
© Copyright Polaris Industries Inc.
q
cable(s)
w
cable(s)