Polaris 2000 Universal Snow Owner's Safety And Maintenance Manual page 54

Careful periodic maintenance will help keep your vehicle in the safest, most reliable
condition. Inspection, adjustment and lubrication of important components are ex-
plained on the following chart and maintenance pages of this manual.
For continued maximum machine performance and component life, it is recom-
mended that maintenance checks be performed at 1000 mile (1600 km) intervals.
Service and adjustments are critical. If you are not familiar with safe service and
adjustment procedures, have a qualified dealer perform these operations.
NOTE: The following chart is a guide based on average riding conditions. You may
need to increase frequency based on riding conditions. Inspection may reveal the
need for replacement parts. Always use genuine Polaris parts available from your
Polaris dealer.
ITEM WEEKLY
OR
BEFORE
LONG
TRIP
Check brake operation and Daily
adjustment
Test auxiliary shut-off switch Daily
Test throttle safety switch Daily
Throttle lever operation Daily
Check track alignment X
Check track tension X
Check chaincase oil level X
Check gearcase oil level X
Check drive chain X
tension
Check drive belt condition X
Check operation of head- X
lights, taillight, brakelight
Check and tighten loose sus- X
pension mounting bolts
Tighten ski saddle and X
spindle bolts
Check front limiter strap X
condition, tighten bolts
Check ski skags- replace X
when worn to 1/2 original di-
ameter
Check hi-fax thickness X
Replace when worn (Dealer)
Tighten rear idler wheel bolts X
Tighten idler adjusting bolt X
jam nuts
Check spark plug condition X
MAINTENANCE
150MI. 1000 MI. 2000 MI. SEE
(240 KM) (1600 KM) (3200 KM) PAGE
10, 40
69
40
40
92
90
67
68
67
80
15
75
101
101
126
100
101
92
92
56
49