Polaris 2000 Universal Snow Owner's Safety And Maintenance Manual page 58

Coupler Greasing - WideTrak
Grease couplers on driveshaft and jackshaft
1
2
NOTE: Grease points in the illustrations are indicated by a
1. Jackshaft
2. Driveshaft
3. Transmission
Jackshaft Bearing Greasing
Loosen driven clutch retaining bolt and pull
clutch outward to expose bearing and grease
fitting. Inject grease into grease fitting in flan-
gette until grease purges out, inside or out-
side the bearing seal (this should take only 2
pumps). Push clutch back onto shaft and re-
place clutch retaining bolt. Torque to 18 ft. lbs.
(2.48 kg/m).
Driveshaft Bearing Greasing
Inject grease into fitting on speedometer drive
adaptor until grease purges out inside or out-
side bearing seal (this should take only 2
pumps).
MAINTENANCE
3
.
1
2
53