Polaris 2000 Universal Snow Owner's Safety And Maintenance Manual page 83

MAINTENANCE
Handlebar Adjustment - All Other Models
Your snowmobile has handlebars
which may be adjusted for your person-
al fit.
1. Remove handlebar cover and
foam.
2. Using a 7/16" (11 mm) wrench,
loosen four nuts on bottom of
adjuster block. NOTE: Turn
handlebar to left or right for access
to back nuts.
3. Adjust handlebar to the desired height. Be sure that handlebars, brake lever
and throttle lever operate smoothly and do not hit the gas tank, windshield or
any other part of the machine when turned fully to the left or right.
4. Torque the handlebar adjuster block bolts to 11-13 ft. lbs. (1.5-1.8 kg/m).
5. Replace handlebar cover and foam.
78
2
1
3
4