Polaris 2000 Universal Snow Owner's Safety And Maintenance Manual page 136

SUSPENSION
Torsion Spring Adjustment - Xtra-12 Type
Torsion spring preload is adjusted by
turning the two position cam (A) on
the short leg of the spring as shown
with the engine spark plug tool. This
adjustment is easier if the long spring
leg is lifted over the roller and re-
placed after the cam is properly posi-
A
tioned.
Soft Tension Long End to Front
A
Firm Tension (Long End Up)
Torsion Spring Adjustment - Xtra-10 Type
Rear spring tension adjustments are made by rotating the eccentric spring block
(A) as shown with the engine spark plug tool. The block provides three spring
tension positions. This adjustment is easier if the long spring leg is lifted over the
roller and replaced after the block is properly positioned.
A
Soft Tension Long End to Front
A
A
Medium Tension (Short End Up) Firm Tension (Long End Up)
131