Zone 2; Connecting Zone 2 - Integra DTM-40.4 Instruction Manual

Zone 2

In addition to your main listening room, you can also enjoy playback in a second room referred to as Zone 2. In addition,
you can select a different source for each room.

Connecting Zone 2

This setup allows 2-channel playback (with the speaker
set A and B) in your main listening room and 2.1-
channel stereo playback in Zone 2, with a different
source in each room.
Hookup
• Use an RCA audio cable to connect the receiver's
ZONE 2 PRE OUT L/R jacks to an analog audio input
on your Zone 2 amp.
• Connect your Zone 2 speakers to the speaker terminals
on your Zone 2 amp.
• Use a suitable cable to connect the receiver's ZONE 2
PRE OUT: SUBWOOFER to the input on your
powered subwoofer.
Main room
Zone 2
Powered
subwoofer
Notes:
• The Zone 2 volume must be set on the Zone 2 amp.
• If you're using a power amp with no volume control in
Zone 2, you must set the Zone 2 Out setting to

Variable ( page 42).
44
En-
Receiver
Receiver/
integrated amp
Zone 2 Video Output
This receiver features a composite video output for
connection to a TV in Zone 2, so you can enjoy both
audio and video in that zone.
Hookup
• Use a composite video cable to connect the receiver's
ZONE 2 OUT V jack to a composite video input on
your Zone 2 TV.
Main room
Receiver
Zone 2
Note:
• The ZONE 2 OUT V jack outputs video from
components connected to composite video inputs.
TV
TV