Integra DTM-40.4 Instruction Manual page 33

Using the USB/Network Device
Using Remote Playback
1 Start Windows Media Player 12.
To enable remote playback, you must first
configure Windows Media Player 12.
2 Press [NET] button.
The "NET" appears in the display. If it flashes,
verify the network connection.
3 Use []/[] to select "DLNA", and press
[Enter].
A list of media server appears.
Note:
Remote playback cannot be used while the music
files of another media server are being played. You
must stop their playback first.
4 On Windows Media Player 12, right-click on
music file.
Right-click menu appears. For selecting another
media server, select media server from "Other
Libraries" menu on Windows Media Player 12.
5 Select the receiver from right-click menu.
"Play to" window appears and playback on the
product starts. Operations during remote playback
can be made from "Play to" window of Windows 7
on your personal computer. During remote
playback, operations (such as Playback, Pause,
Fast Forward, Fast Rewind, Previous, Next,
Repeat, Random) cannot be made.
6 Adjusting the Volume
You can adjust the volume by adjusting the volume
bar in the "Remote playback" window. The default
maximum volume level is 64. If you wish to
change this, enter the value from the Web Setup in
your browser.
The volume value of the remote window and the
volume value of the receiver may not always
match.
Adjustments you make to the volume in the
receiver will not be reflected in the "Remote
playback" window.
—Continued
33
En-