Integra DTM-40.4 Instruction Manual page 25

Listening to the Radio
5 When you've finished editing the name and
want to store it, be sure to use the arrow
[]/[]/[]/[] button to select "OK" and
then press [Enter]. If you fail to do this, the
name won't be saved.
See the following table for information about the
character strings that can be input when entering
the security key.
There are two patterns of character string: pattern 1
containing mainly lowercase characters, and pattern
2 containing mainly uppercase characters.
You can use the / buttons to select character
strings within each pattern. Use the / buttons to
select the character that you want to input, and press
the ENTER button. If the displayed character string
pattern does not contain the character you want to
input, use the / buttons to display the [Shift
BS OK] character string, use the / buttons to
select "Shift," and press the ENTER button to make
the other character string pattern appear.
1
2
*1
Shift :
Switches the displayed character.
(Left)/(Right):
Select these to move the cursor within the Name
input area.
Space:
Enters a space character.
*2
BS (Back Space) :
"BS" moves the cursor backward one character
space. In addition, "BS" deletes the character to
the left of the cursor.
OK:
Specifies that the entry is complete.
—Continued
Tips:
*1 You can also perform this on the remote
controller by using >10.
*2 By pressing [CLR] on the remote controller, you
can delete all characters in the input.
Notes:
• This procedure can also be performed on the receiver
by using [Setup], Tuning []/[], Preset []/[],
and [Enter].
• Press [Return] to return to the previous menu.
■ Switching the Display
When receiving AM or FM, you can press the remote
controller's [Display] button to switch the display
between the name you specified in Name Edit and the
frequency that's being received.
25
En-