Technical Data - Dynacord PM 502 User Manual

PM 502
9

Technical data

Channels (mono + stereo)
Microphone inputs
Auxiliaries (FX, AUX)
Max. single channel output power, dynamic headroom, IHF-A
•
•
Max. dual channel output power, dynamic headroom, IHF-A
•
•
Max. single channel output power, continuous, 1 kHz, THD = 1%
•
•
Max. midband output power, 1 kHz, THD = 1%, dual channel
•
•
Rated output power, 20-20000 Hz, THD < 0.5%, one channel loaded
•
•
Max. output power, Direct Drive mode (bridge configuration), continuous, 1 kHz, THD = 1%
•
Max. output voltage, power amplifier, 1 kHz, no load
•
•
THD, at 1 kHz, MBW = 22 kHz
•
•
DIM 30, MIC input to speaker output, 3.15
kHz, 15 kHz
IMD-SMPTE, MIC input to speaker outputs, 60
Hz, 7 kHz
Frequency response, -3 dB, ref. 1 kHz
•
Bosch Sicherheitssysteme GmbH
into 4 Ω
into 8 Ω
into 4 Ω
into 8 Ω
into 4 Ω
into 8 Ω
into 4 Ω
into 8 Ω
into 4 Ω
into 8 Ω
into 12 Ω
Dual channel mode
Direct Drive mode
MIC input to master A L/R outputs, +10
dBu, typical
MIC input to speaker output
Any input to any Mixer output
5 + 3
5 x XLR/Jack socket
1 Post, 1 Pre
640 W
350 W
2 x 600 W
2 x 340 W
500 W
280 W
2 x 450 W
2 x 270 W
400 W
240 W
680 W
52 V
rms
100 V
rms
< 0.015%
< 0.15%
< 0.05%
< 0.15%
15–22000 Hz
User manual
Technical data | en 33
15-May-14 | 02 | F01U297804