Panel Control; Indicators (Leds); Panel Functions - Epson Stylus C50 Service Manual

EPSON Stylus C50/C60/C61/C62

1.4 PANEL CONTROL

The control panel of the EPSON Stylus C50/C60 is composed of the 2 non-lock type
push-buttons (Error reset/Ink cartridge exchange), 1 lock-type push-button (Power),
and 2 LEDs. Different from Stylus C50/C60, the Stylus C61/62 is compsed of the 3
non-lock type push-button. (2 LEDs is the same as the Stylus C50/C60.)
Power
(1)
Ink cartridge exchange
Figure 1-12. Control panel

1.4.1 Indicators (LEDs)

(1) Power (Green)
Lights when the operating switch is "ON" and AC power is supplied.
(2) Error (Red)
Lights or blinks when some errors have occurred on the printer.
PRODUCT DESCRIPTION
Error reset
(2)

1.4.2 Panel Functions

Switch
Error reset SW
Ink cartridge
exchange SW
* This function is not available in printing status.
Table 1-17. Panel functions with power on
Switch
Error reset SW
Ink cartridge
exchange SW
*1 Not described in the user's manual.
PANEL CONTROL
Table 1-16. Panel functions
Function
• Loads or Ejects the paper (Pushing within 3seconds).
• Starts the cleaning of printhead (Pushing for 3seconds).
• When carriage is on the ink cartridge change position, return
carriage from ink cartridge change position.
• Starts the ink cartridge change sequence. *
Function
• Start status printings.
• Selects IEEE 1284.4 mode for parallel I/F. *1
Revision C
22