Pf Roller Unit Removal - Epson Stylus C50 Service Manual

EPSON Stylus C50/C60/C61/C62

4.3.13 PF roller unit removal

1. Remove the Upper housing from the printer. (Refer to Section 4.3.1)
2. Remove the CR unit from the printer (Refer to Section 4.3.3)
3. Remove the ASF unit from the printer. (Refer to Section 4.3.5)
4. Remove the PSB/PSE unit from the printer. (Refer to Section 4.3.6)
5. Push the dowels of the Paper guide by using the tweezers, and pull the Paper guide
toward the front side of the printer.
Step1) Push
Step2) Slide to the front side
Figure 4-68. Paper guide removal procedure (1)
When removing the Paper guide upper/left, avoid to damage the
C H E C K
coated surface of the PF roller by using the OHP sheet as shown
P O I N T
figure below.
OHP sheet
Figure 4-69. Paper guide removal procedure (2)
Disassembly and Assembly
Paper guide upper
6. Remove the Lower housing from the printer mechanism. (Refer to Section 4.3.10)
7. Remove the Plain washer, 6.9 x 0.5 x 10.4, L/Na by using the tweezers, and slide
the right PF roller bushing to the left side slightly.
Figure 4-70. PF roller removal (1)
8. Remove the PF roller from the Main frame while sliding the left PF roller bushing
to the right side by using the tweezers.
Figure 4-71. PF roller removal (2)
Disassembly
Plain washer, 6.9 x 0.5 x 10.4, L/Na
Step1) Slide the bush to
Step2) Pull the right side
Revision C
123