Upper Housing Removal - Epson Stylus C50 Service Manual

EPSON Stylus C50/C60/C61/C62

4.3.1 Upper housing removal

1. Move the Edge guide on the ASF unit to the rightmost position.
Edge guide
Figure 4-4. Edge guide setting position for the Lower housing removal
Make sure that the Edge guide is in the cutout portion of the
C H E C K
Upper housing.
P O I N T
Disassembly and Assembly
2. Release total seven hooks of the Upper housing by using the precision screwdriver
(-).
left side
Figure 4-5. Hooks position of the Upper housing
Do not damage hooks by the precision screwdriver (-) in
C A U T I O N
removing the Upper housing.
Do not tilt the printer too much when the Upper housing is
removed by the precision screwdriver (-). This is because ink
may flow if the cap is not covered by the Printhead. (CR is out of
the home position)
Disassembly
Revision C
Backside
right side
Hooks
Front
93