Ink Cartridges Cartridge Part number Black S020187 Color S020191 Media Media name printer cover EPSON 360 dpi Ink Jet Paper EPSON High Quality Ink Jet control Paper panel EPSON Photo Quality Ink Jet Paper output tray EPSON Photo Quality Glossy Paper...
Page 2
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
Power consumption Approx. 16 W (ISO/IEC 10561 Letter Pattern) 300 pages (15% coverage) * This product is also designed for an IT power system phase-to- phase voltage of 220 240 V. ** Check the label on the back of the printer for your printer’s voltage. Environmental Temperature Operation .4 °F ( 18 °C)
P power button); wait 15 seconds; then turn it on again. If this does not clear the error, contact your dealer or EPSON as described in the Printer Basics book. When all the lights flash, your printer may have an internal error.
2. Lower the output tray and open the printer cover. 3. Press the P power button to turn on the printer. The P power light flashes, the B black and A color ink out lights come on, and the ink cartridge holders move left to the installation position.
You cannot print if either ink cartridge is empty. Photo Paper Photo Quality Glossy Film Use these EPSON ink cartridges within six months of Ink Jet Transparencies installing them and before the expiration date on the package: Matte Paper - Heavyweight...
EPSON’s warranty. When you need new ink cartridges, contact your dealer or call EPSON Accessories at (800) 873-7766 or visit our web site at www.epsonsupplies.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral.
The printer’s control panel buttons. Note: When you don’t turn on your printer for a long time, the print quality can decline. It’s a good idea to turn on your printer at least once a month to maintain good print quality. 8/99...
Using the Head Cleaning Utility Follow these steps to run the utility: 1. Make sure the printer is turned on but not printing, and that the B black and A color ink out lights are off. (If an ink out light is flashing or on, replace the ink cartridge before continuing.)
Tip: For best results, use EPSON ink jet paper or photo quality paper whenever you check the print head alignment. Follow these steps: 1. Make sure the printer is turned on and paper is loaded.