Develop Release Sensor Pcb Assy; Develop Press Drive L Assy - Brother HL-4040CN Service Manual

8.51 Develop Release Sensor PCB ASSY

(1) Remove the cup B M3x8 Taptite screw.
(2) Remove the Develop release sensor PCB ASSY from the Frame unit. Disconnect the
Connector from the Develop release sensor PCB ASSY.
Connector
Taptite, cup B M3x8
Develop release sensor PCB ASSY

8.52 Develop Press Drive L ASSY

(1) Remove the Pull up lever spring (for L) from the Hook of Develop press drive L ASSY.
<Left side>
Pull up lever spring (for L)
Fig. 3-153
Frame unit
Develop press drive L ASSY
Fig. 3-154
3-105
Frame unit
<Left side>
Pull up lever L
Hook
Hook
Confidential