Rom Version Check (Function Code 25) - Brother HL-4040CN Service Manual

1.4.6 ROM Version Check (Function code 25)

<Function>
This function allows you to check the management information of the software programs such
as version information, check sum.
<Operating Procedure>
(1) Press the
the maintenance mode. Then, press the OK button.
The machine displays each of terms described below on the LCD.
(2) Press the Go or
MAIN: Ver1.00(A)*
PCL : Ver1.00*
ENG : Ver1.01
NET : Ver1.00
PICT: Ver1.00
B0608071049:5708*
U0612271600:7B0A*
D0611301115:E6C3*
P0612271602:BD40*
- How to display the check sum information
Terms displayed with "*" have the check sum information as well. Press the OK button
when its version information is displayed on the LCD. Press the OK button again to go
back to the version information display. Press the Go,
term.
Note:
If you press the OK button when each version information of Engine, Network and
PictBridge is displayed on the LCD, you cannot check the check sum information.
(3) To terminate this operation, press the Cancel button. The machine returns to the initial
stage of the maintenance mode.
or button to display "MAINTENANCE 25" on the LCD in the initial stage of
or button to check the next term.
LCD
Main program version information (Revision information)
PCL/PS program version information (ROM size)
Engine version information
Network version information
PictBridge version information
Boot program creation date& check sum information
Main program creation date& check sum information
Demo program creation date& check sum information
PCL/PS program creation date& check sum information
Description
or
5-9
buttons to check the next
Confidential