(3) Remove the two cup B M4x12 Taptite screws and cup S M3x6 Taptite screw.
(4) Disconnect the connector. (HL-4050CDN/ 4070CDW only)
(5) Remove the Paper eject ASSY DX/SX.
Parts Replacement Note:
The Paper eject ASSY DX is supplied with the Drive shaft holder already fitted. When replacing
the Paper eject ASSY DX, remove the Drive shaft holder from the supplied Paper eject ASSY
DX first, then assemble the Paper eject ASSY DX.
Taptite, cup S M3x6
Paper eject ASSY DX/SX
Taptite, cup B M4x12
Fig. 3-35
Fig. 3-36
3-41
Connector
Taptite, cup B M4x12
<Back side>
Paper eject ASSY DX/SX
Drive shaft holder
Taptite, bind B M3x10
Confidential