Sony DVCAM DSR-70A Operating Instructions Manual page 53

If the cassette memory capacity of the recording tape is not
sufficient
A message urging you to replace the recording tape by a tape with a
larger cassette memory capacity appears.
For more information about this, see the next section "If the cassette memory
of the recording tape is not large enough."
To cancel the dubbing operation
Press the MENU button.
5
Press the SET button.
The recording tape and source tape are both automatically rewound to
the beginning, and dubbing starts. At the same time, the screen
changes as follows.
To end the dubbing operation while it is in progress
Press the STOP button.
The dubbing operation stops and a message asking whether to copy the
contents of the cassette memory appears.
For more information about this, see "If you end dubbing while it is in
progress" (page 54).
When dubbing is completed
1 A message "COMPLETED" appears on the LCD monitor.
2 The source tape and recording tape are both automatically rewound
to the beginning, and the cassettes ejected.
3 The unit returns to the state in step 3.
6
To continue by dubbing another tape, repeat steps 4 and 5.
7
To end the dubbing operation and exit from the menu, press the
MENU button.
i.LINK DUBBING
(A/V/TC/CM)
EXECUTING.
TCR 00:00:00:00
UBR 00:00:00:00
ABORT:MENU KEY
Chapter 3 Recording and Playback
53