Handling Cassettes
Loading/Ejecting Cassettes
To load a cassette
40
Chapter 3 Recording and Playback
LCD indicator
Loaded cassette position
1
With the unit powered on, press the EJECT button.
The control panel lifts up and the cassette compartment opens.
2
Load a cassette in the direction shown in the figure.
The message "CASSETTE OUT" displayed on the LCD monitor
changes to "TAPE UNTHREAD."
Note
If the message on the LCD monitor does not change to "TAPE
UNTHREAD," redo the cassette insertion procedure.
3
Close the control panel. (You should hear a click.)
The STANDBY indicator lights.
1
EJECT
REW
SERVO
PLAY
Z
B
m
3
STANDBY indicator
2
Standard size
M size
Mini size
F FWD
STANDBY
STOP
x
M