Example Of Display Of Default Values; Speaker Configuration; Subwoofer Mode Setup; Distance - Denon AVR-1708 Owner's Manual

- Select" Large" or "Small" not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based on the frequency set at "Crossover Frequency" (o::rpage
24).
- When "Front Speaker" is set to "Small': "Subwoofer" is automatically
set to "Yes':
-If "Subwoofer" is set to "No': "Front Speaker" is automatically set to
"Large':
-If "Surround Speaker" is set to "None': "Surround Back Speaker" are
automatically set to "None':
- When using just one surround back speaker, connect it to the left
channel (SBL).
- This can be set when system setup menu "Speaker Configuration"
- "Subwoofer" is set to "Yes':
- Play music or a movie source and select the mode offering the
strongest bass.
- Select "LFE+Main" if you want the bass signals to always be
produced from the subwoofer.
[Selectable items]
ILfE
(Nofn,al.ll :
Play low range and LFE signal of channels set to
"Small':
LFE+Main :
Play low range and LFE signal of all channels.
•
Large :Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
:Select this when using small speakers without ample low
frequency reproduction capabilities.
None
:Select this when no speaker is connected.
Yes
:Select this when a subwoofer is connected.
No :Select this when no subwoofer is connected.
Center Speaker
Surround Speaker
Select center speaker use and size.
[Selectable items]
lItI1
~~
III
Subwoofer
Select surround back speaker use and size.
[Selectable items]
(~~J~ ~t<~ r-~j)
(rhjlt,j'i 1~l')
Select surround speakers use and size.
[Selectable items]
;~
l)itiit)
:~
Surround Back Speaker
Select subwoofer use.
[Selectable items]
[!!!]
No
~krs
1spkr
Select the number of surround back speakers.
-Nlu•
By default, the AVR-1708's "Amp Assign" setting is set to "ZONE2':To
use as the surround back speaker for the main zone, change the "Amp
Assign" setting (o::rpage 27).
i i _ _
y !:::
=:.
6: Subl.:JOO fe~"
Speaker Configuration
Subwoofer Mode Setup
Distance
Crossover Frequency
Test Tone
In lists of selectable items or adjustable ranges, the item )
surrounded by a border is the default value.
Example of Display of Default
Values
•
~;.:.. ~peatcer'~Configuration
Select.
~eaker
cOnfiguration and siza,
(ba~s,reprodpctioncapabilityt
."Y;'-;~
,
.0Y -
,;-:' z ,
:7,
[Di~aY)h
cl~~-
:,' 1 I.
5
p
2" I n 3
=
0
F'
I
[Selectable items]
~
I
,i!~
Front Speaker
ENGLISH
•
Select front speaker size.
[Selectable items]
I
Large
I·
Small
I
Operations (lI2U"page 22)
23