Denon AVR-1708 Owner's Manual page 61

ENGLISH
(Audio]
SymJrte»!i cauSe COu.........
Jimt';~',
". page
No sound is
• You
are playing a monaural • The mode is set to something 30
produced from source (TV, AM radio broadcast. other than "STANDARD (Dolby/
center speaker. etc.) in the STANDARD (Dolby/ DTS Surround) ' . '
DTS Surround) mode.
No sound • The surround mode is set to • Set to a surround playback 30
is produced "STEREO'; or "DIRECT'.' mode.
from surround
speakers.
No sound is • The surround back speaker's • Check the setting and change it 27
produced from power amplifier is assigned to a as necessary.
surround back different channel.
speaker. • Surround back speaker setting is • Set to something other than 23
set to "None': "None'.'
• Surround mode not set to a mode • Select a
surround playback 29, 30
for 6.1- or 7.1-channel playback. mode.
No sound is
• Subwoofer's power not turned • Turn on the subwoofer's power. -
produced from on.
subwoofer.
• The
"Subwoofer" setting at • Set to "Yes'.' 23
"Speaker configuration" is set to
"No'.'
• The subwoofer is not properly • Check the connections. 9
connected.
• The
subwoofer's volume is • Adjust the subwoofer's volume 41
turned off. to an appropriate level.
No test tones are
• Surround
mode not set to • Set to the STANDARD mode. 29
produced when
"STANDARD'.'
main remote
control unit's TEST
button is pressed.
DTS sound is not
• DVD player's audio output setting • Set the DVD player. For details,
-
output. is not set to bitstream. refer to the DVD player's
operating instructions.
·DVD player is not compatible • Use a DTS-compatible player.
-
with DTS sound playback.
• The AVR-1708's "Input Mode" • Set to the "Auto" or "OTS" 35
setting is set to other than mode.
"OTS'.'
HDMI audio • The audio signal input to the 10
signals are not HOMI input terminal cannot be
output from
-
played on the AVR-1708. Input
speakers. the audio signal to the digital
audio input terminal or analog
audio input terminal.
No sound is • HOMI input setting is improper.
• Check the HOM I input setting.
25
output from
the monitor
connected
with HOMI
connections.
(Video)
SymptOm
..
'
Ca~
.,
,CQunterme8sUre .
"'~
No picture • The connections between the • Check the connections.
10 ~ 17
appears. AVR-1708 and monitor are faulty.
• The monitor's input setting is • Set properly. -
wrong.
• The player is connected using the • High definition (1080i/720p) and -
component input connectors, the
progressive (480p/576p) video
monitor is connected using the signals are not down-converted.
video (yellow) or S-Video output Set the player to interlace
connectors.
(480i/576i) signals.
No picture • The connections to the HOM I • Check the connections.
10
appears connectors are faulty.
with HOMI
• HOM I input setting is improper. • Check the HDMI input setting.
25
connections. • The monitor is not compatible • Connect a
monitor that is 10
with copyright protection
compatible with copyright
(HOCP). protection (HOCP).
• The HOMI format of the player • Match the HOM I format of the
10
and monitor do not match.
player and monitor.
Picture cannot be • Input source does not match • The video conversion function 13
recorded.
recorder's video connection does not work for the REC
connector (video or S-Video). OUT connectors. Match the
input source and recorder
connections.
OVOs cannot be • This is not a malfunction. Most
-
copied on a VCR. movie software includes copy
-
prevention signals and cannot be
copied.
58