Tone Control - Denon AVR-1708 Owner's Manual

ENGLISH
Select playback mode for surround back channels.
5B CH OUT
(for Multi-channel sources)
•
Toile Control
Adjust the tonal Quality of the sound.
Tone Defeat
Turn tone adjustments off.
"Bass" and "Treble" can be set when "Tone Defeat" is set to "OFF':
,~
,~1
The tone cannot be adjusted when in the DIRECT mode.
Bass
[Selectable items]
ON
Playback without tone adjustment.
OFF :
Allow tone adjustment (treble, bass).
Adjust low frequency range (bass).
Treble
[Variable range]-14dB -14dB
Adjust high frequency range (treble).
[Variable range] -14dB -14dB
The input from the subwoofer channel is attenuated.
The input from the subwoofer channel is not attenuated.
Usually use in this mode.
ON
~:
5UBWOOFER An:
Determine whether to use surround back speakers.
5B CH OUT
(for 2-channel sources)
[Selectable items]
ON :
The surround back channel signal is played.
OFF :
The surround back channel signal is not played.
Attenuate subwoofer level when using EXT IN mode.
[Selectable items]
Turn subwoofer output on and off.
5ubwoofer
~.
~:i'
Set this to "ON" if the subwoofer channel level seems too high when
playing Super Audio CD.
Resets the settings to the default values.
Default
[Selectable items]
~:
The subwoofer is used.
OFF .
The subwoofer is not used.
No signal is played from the surround back
channels.
The same signals as those of the surround
channels are output from the surround back
channels.
The surround channel signals undergo digital
matrix processing and are output from the
surround back channels.
MTRXON
Off
ESMTRX
ES OSCRr
NONMTU
PLnxMUSIC
PUIx
CINEMA
*
1
IIx
: Decoded in Dolby Pro Logic Cinema mode,
surround back signal played.
*2
: Decoded in Dolby Pro Logic
IIx
Music mode,
surround back signal played.
*3
: DTS signal played with digital matrix processing.
*4
: Signal included in DTS-ES Discrete 6.1-channel
sources played.
*
1: This can be selected when "Surround Back" is set to "2spkrs"
at the system setup menu "Speaker Setup" - "Speaker
Configuration" setting (n2Fpage 23).
*
2: This can be selected when "Surround Back" is set to "2spkrs" or
"lspkr" at the system setup menu "Speaker Setup" -"Speaker
Configuration" setting.
*
3: This can be selected when playing DTS sources.
*
4: This can be selected when playing DTS sources including a
discrete 6.1-ehannel signal identification signal.
[Selectable items]
32