Control Features - GE WCVH4800K Technical Service Manual

WARNING!
Quick Start
If the screen is dark, press the POWER button to "wake up"
the display.
Press the POWER button.
1
Select a wash cycle. (Defaults
2
are set for each wash cycle.
These default settings can be
changed. See Control settings
for more information.)
If you selected a wash cycle,
3
press the START/PAUSE button.
Power
1
Press to "wake up" the display. If the display is active, press to put the washer into standby mode.
NOTE: Pressing POWER does not disconnect the appliance from the power supply.

Control Features

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating this appliance.
– 6 –
(Continued Next Page)