Throughout this manual, features and appearances may vary from your model.
Features of
the washer
control panel
Control Features
1 POWER. Press to "wake up" the display.
If the display is active, press to put the washer
into standby mode. If there is no screen
activity for 5 minutes the display will turn off.
You may also press the Touch Screen or any
button to "wake up" the display.
NOTE: Pressing POWER does not
disconnect the appliance from the
power supply.
2 MY CYCLES. Press to use, create, rename,
modify or delete custom wash cycles.
3 BACK. Press to return to the previous screen.
4 TOUCH SCREEN. Press the graphics on the
interactive display to use the washer features.
Do not use sharp objects to press the
Touch Screen.
NOTE: If the washer is inactive for
5 minutes, the Touch Screen will go into
standby mode, and the display will be dark.
Press the Touch Screen or any button to
"wake up" the display.
5 HOME. Press to return to the "TOUCH
TO SELECT WASH CYCLE" screen
(Home Screen).
6 START/STOP. Press to start a wash cycle.
If the washer is running, pressing once will
pause the washer. Press again to restart the
wash cycle.
NOTE: If the washer is paused and the
cycle is not restarted within one hour, the
washer will enter standby mode and the
current wash cycle will be canceled.
7 HELP. Press to set machine preferences,
to find help using the Touch Screen or
to find troubleshooting tips for common
washer problems.
– 7 –
S
TART
S
TOP