Planet WNRT-625G User Manual page 21

Parameter
Obtain an IP address
Host Name
MAC Address
Use the following IP
address
IP Address
Subnet Mask
Gateway
User ID
Password
PPTP Gateway
Connection ID
MTU
BEZEQ-ISRAEL
Connection Type
Description
Select it if the ISP requires you to obtain an IP address by DHCP automatically.
Type in the host name provided by your ISP if any; otherwise, just leave it blank.
To connect to the Internet, your ISP will require a MAC address from your PC.
Type in this MAC address in this section or use the "Clone MAC Address"
button to replace the WAN port MAC address with the MAC address of that PC.
Select it if the ISP provides you a static IP to connect to the PPTP server.
This is the IP address that your ISP has given you to establish a PPTP
connection.
Enter the Subnet Mask provided by your ISP (e.g. 255.255.255.0)
Enter the IP address of the ISP's Gateway.
Enter the User Name provided by your ISP for the PPTP connection.
Sometimes called a Connection ID.
Enter the Password provided by your ISP for the PPTP connection
If your LAN has a PPTP gateway, enter that PPTP gateway's IP address here. If
you do not have a PPTP gateway, enter the ISP's Gateway IP address above.
This is the ID given by ISP. This is an optional parameter.
This is an optional parameter. You can specify the maximum size of
transmission packet to the Internet. The range of the MTU will be from 512 to
1492. You can also consult you ISP for the optimal MTU as well. Default: 1392
Select this item if you are using the service provided by BEZEQ in Israel.
If you select "Continuous", the router will always connect to the ISP. If the WAN
line breaks down and links again, the router shall auto- reconnect to the ISP.
21