Lan - Planet WNRT-625G User Manual

After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-625G with new configuration. Please refer to section 4.2.7 for more
information about this screen.
5.3

LAN

The LAN Port screen below allows you to specify a private IP address for your router's LAN interface.
Parameters Description
LAN IP Please input the IP address of this router.
Designate the Access Point's IP Address. This IP Address should be unique in
IP Address
your network. The default IP Address is 192.168.0.1.
Specify a Subnet Mask for your LAN segment. The Subnet Mask of the Access
Subnet Mask
Point is fixed and the value is 255.255.255.0.
If it is enabled, this router will use the spanning tree protocol to prevent from
802.1d Spanning Tree
network loop happened in the LAN ports.
DHCP Server Enable or disable the DHCP Server.
37