Planet WNRT-625G User Manual page 59

Current Virtual Server Table
Delete Selected
Delete All
Reset
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-625G with new configuration. Please refer to section 4.2.7 for more
information about this screen.
If you want to remove some items from the "Current Virtual Server Table",
select the MAC addresses you want to remove in the table and then click
"Delete Selected".
If you want remove all items of the table, just click this button.
Click "Reset" will clear your current selections.
59