Planet WNRT-625G User Manual page 49

5.4.5 WPS
Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients
and this wireless router. You don't have to select encryption mode and input a long encryption pass
phrase every time when you need to setup a wireless client, you only have to press a button on wireless
client and router, and the WPS will do the rest for you.
This wireless router supports two types of WPS: Push-Button Configuration (PBC), and PIN code. If you
want to use PBC, you have to push a specific button on the wireless client to start WPS mode, and switch
this wireless router to WPS mode too. You can push RET/WPS button of this wireless router, or click
'Start PBC' button in the web configuration interface to do this. If you want to use PIN code, you can see
the setup as below.
Parameters Description
Enable WPS Check this box to enable WPS function, uncheck it to disable WPS.
Wi-Fi Protected
WPS-related system information will be displayed here.
Setup Information
If the wireless security (encryption) function of this wireless router is properly set,
WPS Status you'll see 'Configured' message here. If wireless security function has not been set,
you'll see 'unConfigured'.
This is the WPS PIN code of this wireless router. This code is useful when
Self PIN code WNRT-625G router sets as Enrollee, you need to fill this number into the web page
of the other device.
SSID The SSID of this wireless router will be displayed here.
Authentication The wireless security authentication mode of this wireless router will be displayed
Mode here.
49