When The Programme Has Ended - Bosch Maxx 5 Operating And Installation Instructions

When the programme has ended

Setting "---" (without final
spin ) selected
i Display panel:
- All symbols on the programme status display have
gone out, the full progress bar, washing
temperature, spin speed, drying time, rinse cycles
and recommended load are displayed,
- The programme duration is shown as -0-,
- If the childproof lock is selected, the G symbol is lit
and the programme duration is shown as 0:01.
Please deactivate the childproof lock, see page 35
- If too much detergent was added, the : symbol
lights up.
i If the load display flashes after the drying process
has finished and the load is not dried adequately,
consider the following for the next load to be dried:
- Load the laundry to be dried according to recom
mended load.
- Select Spin" with the highest spin speed before
laundry is dried.
q If the water pressure is low, the
up.
q Turn the programme selector to Off.
or
i Display panel:
- The K symbol, rinse cycles, the full progress bar
and the washing temperature are shown on the
programme status display,
- The programme duration and spin speed are
shown as "---".
- If the childproof lock is selected, the G symbol
lights up,
- If detergent was overdosed, the : symbol lights
up.
symbol lights
39