Bosch Maxx 5 Operating And Installation Instructions page 62

Transport,
e.g. when moving
Preparing and inserting the
transport bolts
62
Before transporting the washer dryer:
- Turn off the tap.
- Reduce the water pressure in the water inlet hose
(refer to page 46).
- Drain any residual washing solution (refer to
page 45).
- Disconnect the washer dryer from the mains.
- Dismantle the supply and drainage hose.
- Install transportation protection devices.
Having transported the appliance and ensured
proper installation and connection, allow the Empty
b programme to run through before starting the first
wash programme.
Transporting the washer dryer:
q Remove the 4 covers C.
q Remove the rear cover D and prepare the
transport bolts.
q Insert and tighten the transport bolts.