Before Using Your Washer Dryer For The First Time - Bosch Maxx 5 Operating And Installation Instructions

Before using your washer dryer
for the first time
Preparing your
washer dryer
Attention
The washer dryer must have been installed and
connected properly (refer to page 54).
i The washer dryer was tested before leaving the
factory. To remove any water left over from testing
procedures, the first washing cycle should be
carried out without laundry in the machine.
q Turn the tap on.
q Pull out the detergent drawer all the way.
q Pour approx. 1 litre of water into chamber II of the
detergent dispenser.
q Half fill the measuring beaker with detergent and
pour into chamber II.
i Do not use any special detergents for delicates or
woollens (excessive foam).
q Close the detergent drawer.
q Close the washer dryer door.
q Set the programme selector to Cottons y
90 °C.
q Touch the Start/Pause M button.
The programme starts.
The programme ends when all symbols in the upper
row of the display field go out, the progress bar is
completely filled and the programme duration is
on 0 :
q Turn the programme selector to Off.
13