Bosch Maxx 5 Operating And Installation Instructions page 12

Finish in time
Drying duration or
automatic drying
Rinse cycles
12
- the laundry for drying with low residual moisture.
Increases in time occur because of:
- additional rinse cycle if excessive foam is in the
laundry,
- multiple spinning if the laundry is distributed poorly
in the drum,
- increased heating times, e.g. when the water is too
cold,
- water pressure too low,
- selection of an additional option, e.g. Extra Rinse
K and/or Intensive v after the programme has
started,
- very absorbent washing extends the heating
duration,
- the laundry for drying is wet.
You can select the finish in time, see page 33.
You can set the drying duration or automatic drying by
touching the Dry r button, see page 29. When the
washing and drying without a break was selected,
time drying or auto drying duration will add in
programme duration automatically. Related
programmes will prolong 5 15 minutes for good
washing performance.
On if there is (are) rinse cycle(s) with the selected
programme or Extra Rinse K " was selected. The
symbol means default rinse cycle(s) + selected
additional rinse cycle " by touching the Extra Rinse
K " button.