Bosch Maxx 5 Operating And Installation Instructions page 55

Useful tools
Dimensions
Installation surface
The following tools are helpful:
- Box wrench A/F 13 for removing the transportation
bolts.
- Spirit level for aligning the washer dryer.
a = 600 mm
b = 560 mm
c = 850 mm
Weight 73 kg
Appliance stability is important so that the washer
dryer does not wander" during the spin cycles.
The installation surface must be solid and level. Soft
floor coverings, e.g. carpets or floor coverings with
a foam backing are not suitable.
If the washer dryer is to be installed on a wooden
floor:
q If possible, install the washer dryer in a corner.
q Screw a water resistant wooden board (at least
30 mm thick) to the floor.
q Secure the washer dryer feet with fixing brackets*.
If the washer dryer is to be installed on a base:
q Secure the washer dryer feet with fixing brackets*.
* Holding brackets (set) can be obtained from
a specialist store or the Customer Service,
order no. WMZ 2200.
55