Bosch Maxx 5 Operating And Installation Instructions page 33

Finish in time
Example of Easy Care 40 ºC
programme:
Before a programme starts, you can specify by how
many hours later the programme is to be ended.
q Touch the W Finish in button, the display shows
the minimum finish in time of the selected
programme. Such as 1h, i.e.1 hours.
i The minimum finish in time of different
programmes are different. It depends on the
duration of selected programme.
q Touch the W Finish in button until the desired
number of hours is displayed.
i The finish in time can be set in 1 hour steps.
The time can be delayed up to a maximum of 24h.
If a finish in time of 24h has been set, the
programme duration mode can be accessed by
touching the W Finish in button again.
You can change other settings
or
q Touch the Start/Pause M button.
The finish in time starts counting down. The first
segment of the progress bar flashes.
i The finish in time is counted down by the hour.
When the finish in time has elapsed, the
programme starts automatically and the
programme duration is displayed.
i Changes to the finish in time or an immediate start
are possible. To do this:
- Touch the Start/Pause M button. The programme
duration time appears.
- Touch the Start/Pause M button directly to start
the programme immediately. If required, reset the
finish in time.
- Touch the Start/Pause M button.
33