Bosch Maxx 5 Operating And Installation Instructions page 11

G
Childproof lock
Fan
Recommended load
Spin speed
Washing temperature
Programme duration
Overdosage of detergent may cause excessive froth
formation and impair the washing and rinsing results.
A rinse cycle is automatically run.
i The : symbol goes out when the appliance
switches off at the end of the programme or if the
programme is changed.
The activated childproof lock prevents the selected
programme from being changed while the
programme is running.
The fan works at the last period of drying duration for
cooling the laundry.
i Do not interrupt this cooling process.
The recommended load is displayed depending on
the selected programme and additional functions, see
from page 22.
The default spin speed is displayed depending on the
selected programme and additional functions.
You can change this speed, see page 32.
The default washing temperature is displayed after
selecting the programme and it can be changed by
touching the Temp.
When the programme has been selected, the
expected programme duration (time after which the
programme is expected to end) is displayed.
The programme duration is displayed in hours and
minutes, e.g.
1:30 = 1 hour and 30 minutes
0:35 = 35 minutes.
When the programme has started, the programme
duration counts down in minutes.
When the programme ends, the displays shows 0 .
i While the programme is running, the programme
duration may be extended or reduced for the
following reasons.
Reductions in time occur because of:
- small loads,
- reduced heating times, e.g. if the water is very hot,
- reduced washing temperature after the
programme has started,
button, see page 32.
11