Placing Originals; Dial The Receiving System - Utax CD 1435 User Manual

Placing Originals

Dial the Receiving System

Enter Destination.
ABCD abcd@efg.com
Pause Space
On Hook Direct Chain Detail
0001 0002 0003
AAA BBB CCC
0006 0007 0008
FFF GGG HHH
Destination Quick Setup Org./Sending
Data Format
Status
Destination
Address
Book
FAX No.
Entry
Backspace
Delete Recall
Check
Destinations
0004 0005
No.
DDD EEE
0009 0010
1/100
III JJJ
Image Quality Advanced Program
Setup
10/10/2010 10:10
Place the originals on the glass surface or in the
optional document processor. Refer to the
machine's Operation Guide for placing originals.
1
Press [FAX No. Entry].
NOTE:
When you press the numeric keys to enter
numbers, the screen changes to the entry screen
for the fax number (the screen shown in the next
step).
2
Enter the fax number of the receiving system using
the numeric keys.
• If Entry Check for New Destination is Off, press
[OK] to complete entering the number.
• If Entry Check for New Destination is On, press
[OK] and you are prompted to confirm the FAX
number is correct. Re-enter the same FAX number
and press [OK] to complete the entry.
For details, refer to Entry Check for New
Destination in the machine's Operation Guide.
To continue entering a new number, press [FAX No.
Entry] and repeat the above procedure.
To correct the FAX number, press [Edit].
Up to 64 digits can be entered as the fax number of
the receiving system.
Press [Space] to enter a space.
Use [ ] or [ ] to move the cursor.
To correct the fax number, press [Backspace] on the
touch panel, and delete the digits one by one before
3-6
FAX Operation (Basic)