Logging In When Job Accounting Has Been Enabled - Utax CD 1435 User Manual

Logging in when Job Accounting has been Enabled

When job accounting has been enabled, you need to enter an Account ID when using the machine.
NOTE:
When both user accounting and job accounting have been enabled, the screen for entering a User ID
and Password is displayed.
********
Check Counter
Status
Sending faxed documents to a specified additional address
A setting can be enabled to have faxes sent by users also be sent to an address set by the administrator.
NOTE:
This function is enabled for fax when it is enabled for the send function. The function cannot be
enabled for fax only. To enable this function, see the manual for the machine.
1
Use the numeric keys to enter Account ID, and
press [Login].
NOTE:
You can check the number of pages used by a
department by entering the Account ID and pressing
[Check Counter]. Press [Close] in the counter browsing
screen to log in.
Login
10/10/2010
2
Perform the fax operation.
NOTE:
When the operation is completed, press the
Authentication/Logout key.
4-63
FAX Operation (Advanced)
4