Utax CD 1435 User Manual page 96

Cancelling the Setting of RX/Forward Requirements
To cancel the memory forwarding, follow the steps below.
Forwarding Detail Settings
With the forwarding settings, you can change the following detail settings.
Activating Time Setting
Specify the times when the preset requirements are activated and deactivated.
Requirement: - Activating Time
Specify the time for activating the requirements.
Print or forward the faxes received during the preset
time according to the requirements.
Start
All Day
:
Preset Time
End
:
Status
Priority Setting
Set the priority of a registered forwarding requirement.
Cancel OK
10/10/2010 10:10
4-28
1
Press the System Menu key.
2
Press [FAX] and then [Next] of RX/Forward
Requirements.
3
Press [Off] and then [OK].
1
Follow steps 1 to 3 of Using Requirements for All
Receptions on page 4-20.
Follow steps 1 to 3 of Using Rule for Specific RX on
page 4-22.
2
Select the requirement and press [Detail].
3
Press [Change] of Activating Time.
4
Select [All Day] or [Preset Time].
To forward received originals all day, select [All
Day], press [OK] and then go to step 5.
To set the forwarding time, select [Preset Time] and
go to the next step.
5
Press [+]/[-] to enter Start Time and End Time, and
then press [OK].
NOTE:
Enter the time on the 24 hours system.
1
Follow steps 1 to 3 of Using Rule for Specific RX on
page 4-22.
2
Select the requirement and press [Detail].
3
Press [Change] of Priority.
4
Press [+] or [-] or use the numeric keys to enter the
priority.
5
Press [OK].
FAX Operation (Advanced)