Utax CD 1435 User Manual page 180

FAX No. Entry - Detail
:
Sub Address
:
Transmission Start Speed 33600bps
: On
ECM
: Off
Encrypted Transmission
Status
Enter Destination.
FAX No. Entry - Encrypted Transmission
Off
Encryption Key No.
On
Key 01
Key 02
Key 03
Key 04
Key 05
Status
FAX No. Entry - Encryption Box
Off Enter box number using numeric keys.
On
Box No.
Status
Destination
Change
Change
Change
Change
Cancel OK
10/10/2010
1/1
Off
Encryption
Box
Cancel OK
10/10/2010
Cancel OK
10/10/2010 10:10
6-32
4
Press [FAX No. Entry].
5
Use the numeric keys to enter fax number of the
other party.
For details, refer to Direct Transmission on page 3-
4.
NOTE:
When encrypted transmission has been set to
a destination in the Address Book or One-touch keys,
you can use the destination.
6
Press [Detail] and [Change] of Encrypted
Transmission.
7
Press [On] and select the encryption key number.
8
Press [OK] and go to step 10. When the selection
of an encryption box is required by the other party,
press [Encryption Box] and go to the next step.
NOTE:
When the machine receives originals, the
encryption box is not used.
9
Press [On] and use the numeric keys to enter the
encryption box number (4 digits), and press [OK].
10
Press [OK].
11
Press [OK].
12
Press the Start key. The transmission will start.
Setup and Registration