Utax CD 1435 User Manual page 45

document processor starts. When multiple-page originals are placed, each page is scanned after the previous
one is sent.
Direct Transmission (When originals are placed on the glass surface):
This method is suitable for sending book originals that cannot be placed in the document processor. After the
telephone line has connected with the receiving system, the originals placed on the glass surface are scanned
and sent.
NOTE:
When continuous scan is set, you can continue with scanning of a next original after an original on the
glass surface has been sent. Every time one page is scanned, you perform an operation to allow continued
scanning.
Sending Image
Zoom Centering
Continuous
Scan
Original : A4
FAX
Zoom : 100%
Polling RX
Send : A4
Preview
Preview
Destination Quick Setup Org./Sending
Data Format
Status
Enter Destination.
ABCD abcd@efg.com
Pause Space
On Hook Direct Chain Detail
0001 0002 0003
AAA BBB CCC DDD
0006 0007 0008
FFF GGG HHH III
Destination Quick Setup Org./Sending
Data Format
Status
Destination
Border Erase FAX Delayed
Transmission
Job Finish File Name FAX Direct
Notice Entry Transmission
Send and Send and
Print Store
Image Quality Advanced Program
Setup
10/10/2010
Destination
Address
Book
FAX No.
Entry
Backspace
Delete Recall
Check
Destinations
0004 0005 No.
EEE
0009 0010
1/100
JJJ
Image Quality Advanced Program
Setup
10/10/2010 10:10
To select direct transmission, use the following
procedure.
1
Press [Advanced Setup], and then [FAX Direct
Transmission].
2
Press [On].
3
Press [OK].
You can also select the transmission method on the
basic FAX screen. In the basic screen for FAX, press
[Direct].
This selects the direct transmission method and the
keys on the touch panel are highlighted.
Press the highlighted [Direct] key to change the
transmission method to memory transmission.
3-5
FAX Operation (Basic)
3