Display - Honeywell HSVR-16 User Manual

Figure 5-19 The PTZ Setup Menu

Display

Display setup interface is shown as below. See
•
•
•
•
•
•
•
•
•
•
Please highlight icon
After completing all the setups click Save, and the system goes back to the
previous menu.
54
Transparency: Here is for you to adjust transparency. The value ranges from
128 to 255.
Channel name: Here is for you to modify channel name. System max support
25-digit (The value may vary due to different series). Please note all your
modification here only applies to DVR local end. You need to open web or client
end to refresh channel name.
Time display: You can select to display time or not when system is playback.
Channel display: You can select to channel name or not when system is
playback.
Overlay information: System displays some information in the screen for your
reference.
Display mode: you can select from the dropdown list: self-adaptive/VGA/TV.
Enable tour: activate tour function.
Interval: Input proper interval value here. The value ranges from 5-120 seconds.
In tour process, you can use mouse or click Shift to turn on window switch
function. Stands for opening switch function,
function.
Motion tour type: System support 1/8 window tour.
Alarm tour type: System support 1/4/9/16 window tour.
to select the corresponding function.
Figure 5-20.
stands for closing switch
Honeywell