Honeywell HSVR-16 User Manual page 94

•
Network
The network interface is shown as in
Figure 6-33 The Network Setup Menu
Please refer to the following sheet for detailed information.
Email
The email interface is shown in
86
Parity: None.
Parameter Function
Ethernet Please select the network card first.
Dynamically get IP address. You can get the device IP from the DHCP
DHCP
server if you enabled this function.
TCP Port Default value is 37777.
HTTP Port Default value is 80.
Network user max amount. The value ranges from 0 to 10.
Max Connection
0 means there is no user can access current device.
Input the PPPoE user name and password you get from the IPS
(internet service provider) and enable PPPoE function. Please save
current setup and then reboot the device to get the setup activated.
Remote Device connects to the internet via PPPoE after reboot. You can get the
PPPOE
Host IP address in the WAN from the IP address column.
Please note if you want to reboot the device please make sure you
have proper reboot authority and there is no local login user in the
current device.
Figure 6-33.
Figure 6-33.
Honeywell