Backup - Honeywell HSVR-16 User Manual

Honeywell
Figure 4-24 Device Detection Menu of Backup

Backup

Select backup device and then set channel, file start time and end time.
Click Add, and system begins searching. All matched files are listed below. System
automatically calculates the capacity needed and remained. See
Figure 4-25.
The system only backs up the files with a √ before channel name. You can click
Fn or Cancel to delete √ after file serial number.
Click Backup, and you can back up the selected files. There is a process bar for
you reference.
When the system completes backup, you can see a dialogue box prompting
successful backup.
Figure 4-25 Searching Results and Backup Menu
Click Backup, and the system begins burning. At the same time, the Backup
button changes to the Stop button. You can view the remaining time and process
bar at the bottom left. See .
Figure 4-26
33