Honeywell HSVR-16 User Manual page 101

Motion detection function becomes activated in the specified periods.
There are six periods in one day. Please draw a circle to enable corresponding
period.
Period
Select date. If you do not select, current setup applies to today only. You can
select all week column to apply to the whole week.
Click OK, and the system goes back to motion detection interface; please click
Save to exit.
Anti-dither Not Effective in the current DVR version.
There is 3-channel alarm output.
Corresponding to motion detection alarm output port(multiple choices)
Normal out
Enable alarm activation function. You need to select alarm output port so that
system can activate corresponding alarm device when alarm occurs.
System can delay the alarm output for specified time after alarm ended. The
Alarm latch
value ranges from 10s to 300s.
System auto activates motion detection channel (multiple choices) to record
Record once alarm occurs (working with motion detection function). Please note you
channel need to go to Chapter 4.4 Schedule to set motion detection record period and go
to chapter 4.2 Manual Record to set current period as auto record.
System can delay the record for specified time after alarm ended. The value
Record latch
ranges from 10s to 300s.
If you enabled this function, System can send out email to alert you when alarm
Email
occurs and ends.
Display video in local monitor window by tour. if there're record channels
Tour
selected, only the record channels will be displayed in the tour.
PTZ Here you can set PTZ movement when alarm occurs. Such as go to preset x
Activation when there is an alarm.
It is a shortcut menu button. You can copy current channel setup to one or more
Copy
(all) channels.
You can click save button after you complete setup for one channel, or you can
Save
complete the whole setups and then click save button.
Refresh Click this button to get device latest configuration information.
PTZ
PTZ interface is shown as in
Please note that before operation make sure you have set speed dome address,
and DVR and speed dome connection is OK.
Figure 6-41.
Honeywell
93