3 Installation and Connections
Check Unpacked DVR
When you receive the DVR from the forwarding agent, please check whether there
is any visible damage. The protective materials used for the package of the DVR
can protect most accidental clashes during transportation. Then you can open the
box to check the accessories.
Please check the items in accordance with the list on the warranty card. Finally you
can remove the protective film of the DVR.
About Front Panel and Rear Panel
For detail information of the function keys in the front panel and the ports in the rear
panel, please refer to the User's Manual included in the resource CD.
The model in the front panel is very important; please check according to your
purchase order.
The label in the rear panel is very important too. Usually we need you to represent
the serial number when we provide the service after sales.
HDD Installation
This series DVR has only one SATA HDD. Please use HDD of 7200rpm or higher.
You can refer to the user guide for recommended HDD brand.
Please follow the instructions below to install hard disk.
1. Loosen the screws of the
upper cover.
12
All the installation and operations here should conform to your
Note
local electrical safety rules
2. Remove upper cover.
Honeywell
3. Turn four screws for three
rounds to fix HDD bracket.