Print Settings - Kyocera ECOSYS P6021cdn Operation Manual

Print Settings

>Paper Source
? Cassette 1

Print Settings

These settings specify printing parameters such as the print quality used
for printing (Normal or Fine), the gloss mode (Low or High), the number
of copies, reduced printing and the page orientation.
The options available in Print Settings are as follows:
• Paper Source (Selecting the paper feed source)
• Auto Cass. Change (Auto Cassette Change setting)
• Paper Feed Mode (Setting the paper feed source)
• Duplex (Duplex printing)
• Override A4/LT (Overriding difference between A4 and Letter)
• Emulation (Setting the emulation)
• Color Mode (Selecting color or Black & White printing)
• Print Quality (Setting print quality)
• Page Set (Setting pagination)
• Job Name (The Job Name display settings)
1
Press [MENU].
2
Press  or  repeatedly until Print Settings > appears.
>
Paper Source (Selecting the paper feed source)
You can select the paper source, from which the printer feeds paper as
the default. If an optional paper feeder(s) is installed, it is also available
for the default paper source.
1
Press  while Print Settings > is displayed.
2
Press  or  repeatedly until >Paper Source appears.
3
To change the current paper feed source, press [OK]. A blinking
question mark (?) appears.
4
Press  or  to display the desired paper feed source. The message
display toggles through the following paper feed sources, depending
on the installed optional paper feeders (from the top most paper
cassette to the bottom paper cassette):
MP tray
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Cassettes 2, 3 and 4 are available for selection when the optional
paper feeders are installed.
Note Cassette 4 is only available on the ECOSYS
P6026cdn/ECOSYS P6026cdn Type B.
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
4-37
Using the Operation Panel